Intermate Twinax Connection LX T-04 - Manual (Page 14)

I n s t a l l a t i o n
14 U s e r ‘ s G u i d e
3. Set the address switch to position '9' (test printout function).
4. Switch on the printer. The SYSTEM indicator flashes for a few seconds.
The Intermate LX T-04 produces a test printout on the printer, which shows the
firmware revision and basic configuration. The default configuration is for a
IBM Proprinter emulation.
Printout:
******** TEST PRINTOUT ********
Intermate LX T-04 version: K12-xxxx
Printer Driver #32 IBM Proprinter
IBM Printer Emulation__________ IBM 4214 model 2
System Language________________ 500 International Set 5
ASCII Char. Set________________ PC-858
The default configuration supports Proprinter compatible printers. If you want
to change the configuration, you can do this later using Configuration from the
System when the Intermate LX T-04 has been installed towards the host. You
can also go to Section 3 before continuing with System Attachment.
The test printout shows if the Intermate LX T-04 has been configured for your
printer by the dealer/distributor.
Example:
The printout shows that this Intermate LX T-04 has already been configured for
another printer:
******** TEST PRINTOUT ********
Intermate LX T-04 version: K12-xxxx
Printer Driver #34 Epson LQ
IBM Printer Emulation__________ IBM 5225 model 1
System Language________________ 500 International Set 5
ASCII Char. Set________________ _PC-850