Intermate Twinax Connection LX T-04 - Manual (Page 47)

S o l v i n g P r o b l e m s
I n t e r m a t e L X T - 0 4 47
BE-BAR CODE ERROR
Incorrect or insufficient bar code definition. The bar code must be specified
with five values. See Section 4.
E2-PERMANENT MEMORY CHECKSUM ERROR, FACTORY DEFAULTS SET
This message indicates that the non-volatile memory has been corrupted. The
Intermate LX T-04 is automatically set to factory default state (your
configuration is lost). If the message does not re-appear after
power-off/power-on, configure the Intermate LX T-04. See Section 3.
This message also appears as a normal consequence of a change between laser
and matrix emulation.
E6-MEMORY OVERFLOW: FREE STRING AREA EXHAUSTED
The available string area is exhausted. You must remove some strings from
your configuration. The size of the available string area is printed in the
Parameter List header, and is also displayed in all string programming menus.
F1-TWINAX TRANSCEIVER ERROR
Hardware error. Contact you dealer/distributor.