Intermate Twinax Connection LX T-04 - Manual (Page 27)

A d v a n c e d F u n c t i o n s
I n t e r m a t e L X T - 0 4 27
Configuration from the System
This function allows you to configure the Intermate LX T-04 without
connecting it directly to a terminal as described in Section 3.
By inserting configuration commands in your document, you can tailor the
Intermate LX T-04 to meet special requirements your print jobs.
Document example:
%P (Configuration lead-in sequence)
=207,32 (Printer Driver= IBM Proprinter)
=10,1 (System Language=US English/Canadian)
=54,4 (ASCII Character Set= PC-850)
=206 (Initialize settings)
% (Configuration trailer sequence)
&&??000 (Resume normal emulation mode and save settings)
The example shows how to select a Printer Driver and program the Basic
Configuration parameters.
'%P' Tells the Intermate LX T-04 that configuration commands are to
follow, ie enters Extended Emulation Mode.
'=' Indicates a command line. Each command line has a function or
parameter number.
'207' Is a function number, followed by a comma and a value. '206' is
also a function number. Please refer to the Technical Reference
for a description of functions and their values.
'10' Is a parameter number, followed by a comma and a value. '54' is
also a parameter. See Appendix A for a description of the
parameters.
'%' Indicates the end of the configuration commands.
'&&??000' Exits the Extended Emulation Mode and saves the settings
permanently.