Intel NSI2U User Manual

Page 6

Advertising
background image

Introduction

Revision 1.3

2



The latest version of an operating system signifies the latest supported version
at the time of the actual test run. Each new release of this document may have
a newly supported release of a given operating system. Previous releases of a
supported operating system may not be tested beyond the basic installation
test process.

1.1.1.1

Support Commitment for Basic Installation Testing

Intel commits to provide the following level of customer support for operating systems that
receive only basic installation testing:

Intel will provide and test operating system drivers for each of the server board’s
integrated controllers, provided that the controller vendor has a driver available upon
request. Vendors will not be required by Intel to develop drivers for operating systems
that they do not already support. This may limit the functionality of certain server board
integrated controllers.

Intel will support customer issues that involve installation and/or functionality of
operating system with the server board’s integrated controllers only if a driver has been
made available.

Intel will NOT provide support for issues related to use of any add-in adapters or
peripherals installed in the server system when an operating system that received basic
installation testing only is in use.

Support is defined as assistance in root causing issues, and determining a customer
acceptable resolution to the issue associated with the operating system. The resolution
may include, but is not limited to, on-board controller driver changes, engaging the
vendor for resolution, BIOS changes, firmware changes, or determining a customer
acceptable workaround for the issue.

1.1.2

Adapter / Peripheral Compatibility and Stress Testing

Adapter / Peripheral Compatibility and Stress testing is performed only on the most current
release of a supported operating system at the time of a given validation run. The Adapter /
Peripheral Compatibility and Stress testing process consists of three areas: Base Platform,
Adapter Compatibility, and Stress.

Base Platform: Each base platform will successfully install a given operating system,
successfully run a disk stress test, and successfully run a network stress test.

Adapter Compatibility: Adapter compatibility validation (CV) testing uses test suites to gain an
accurate view of how the server performs with a wide variety of adapters under the primary
supported operating systems. These tests are designed to show hardware compatibility
between the add-in cards and the server platform and include functional testing only. No heavy
stressing of the systems or the cards is performed for CV testing.

Stress Testing: This test sequence uses configurations that include add-in adapters in all
available PCI slots for a minimum 72-hour test run without injecting errors. Each configuration
passes an installation test, a Network/Disk Stress test, and tape backup test. Any fatal errors
that occur will require a complete test restart.

Advertising
This manual is related to the following products: