Reconnecting the stowaway ‍mouse, Reconnecting the stowaway mouse – IGo Direct PPC 6700 User Manual

Page 12

Advertising
background image

Reconnecting the Stowaway Mouse


Despite a high degree of reliability, the Bluetooth connection could break for
many reasons:

¾ When the mouse is powered off, the mouse

circuit will be powered off, and the Bluetooth
connection will be lost.

¾ As a power saving feature, the mouse will be

automatically powered down after an idle
period
(when there is no activity for
approximately 5 minutes).

¾ When the Pocket PC device is turned off, the

established Bluetooth connection will be lost.

¾ When the Pocket PC device and the mouse are

moved away from each other beyond the
wireless range (~10m), the previously
established connection is lost.

When any of these conditions occurs, the connection will be lost and the
software will switch to waiting mode. To restore the connection, make sure
the mouse and Pocket PC device are powered on and in range, then press a
mouse button. See

Bluetooth Accessibility

for further details. The connection

should be reestablished within 2-3 seconds but this may be delayed if the
Bluetooth system on the Pocket PC device is busy. For example, after the
Pocket PC device is powered on, it may take 10 or more seconds for the
Bluetooth system to re-initialize.

NOTE: Do not press the Discoverable button. This will break the bond
between the keyboard and the Pocket PC device. If this happens, you will
have to establish a new connection as described above.

Even when disconnected, the Pocket PC device and the mouse remain
bonded. The mouse will only reconnect to the bonded Pocket PC device and
the Pocket PC device will only listen to the bonded mouse. To break the
bond, press the Discoverable button. Normally the bond will not need to be
broken unless the mouse will be used with another Pocket PC device or
another mouse will be used with the Pocket PC device. Therefore, please
avoid pressing the Discoverable button during normal operation. If this has
happened, you will have to establish a new connection as described in the

Configuring the Mouse to Your Device

section above.

Stowaway Bluetooth Mouse Owner’s Manual

Page 12

Advertising