IGo Direct PPC 6700 - Manual (Page 5)

Setting up the Mouse with Pocket PC
Before You Begin
Before you install the Stowaway keyboard and mouse software for Pocket PC
2003/Windows Mobile 5.0 PDAs:
¾ ActiveSync 4.0 or greater is required to install the keyboard driver
application.
¾ Disable or uninstall any other keyboard or mouse applications
that you have previously installed on your mobile device.
¾ Ensure there is at least 250 KB of memory on your mobile device. To
check the available memory, tap Start¼Settings¼System¼Memory.
¾ Insert the 2 AAA batteries (included) beneath the
battery cover of the Stowaway Mouse and switch
to ON.
Installing the Software
1. Connect your mobile device to a computer using the docking cradle or
sync cable.
2. Establish a connection between the computer and your mobile device
using ActiveSync ® 4.0 or later.
3. Insert the Stowaway CD-ROM into the CD-ROM drive on your PC.
4. Double-click the product, OS and language preferred to start the
installation process. Follow the on-screen instructions to successfully
install the software.
NOTE: The driver must be installed in Main Memory on your device
(default location) to function properly.
5. When prompted to reset your device, tap the on-screen OK button to
complete the installation.
6. After the driver is successfully installed and the mobile device is reset,
the keyboard driver and mouse icons will appear in the Programs
window.
NOTE: The Bluetooth connection between the mobile device and
mouse must be set up through the Stowaway keyboard/mouse
driver.
Stowaway Bluetooth Mouse Owner’s Manual
Page 5