Integra DTR-5.9 - Manual (Page 12)

12
Remote Controller
For detailed information, see the pages in parentheses.
A On/Standby button (38)
Sets the AV receiver to On or Standby.
B Remote Mode/Input Selector buttons (48,
102–108)
Selects the remote controller modes and the input
sources.
C Multi CH button (48)
Selects the multichannel DVD input.
D Arrow [ ]/[ ]/[ ]/[ ] and Enter buttons
Used to select and adjust settings.
E Setup button
Used to change settings.
F Listening Mode buttons (67)
Used to select the listening modes.
G Dimmer button (49)
Adjusts the display brightness.
H Display button (50)
Displays information about the current input source.
I Muting button (49)
Mutes or unmutes the AV receiver.
J VOL [ ]/[ ] button (48)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
K Return button
Returns to the previous display when changing set-
tings.
L Audio button (79)
Used to change audio settings.
When the Audio TV Out setting is set to On
(page 91), this button is disabled.
M Sleep button (49)
Used with the Sleep function.
* SP A/B is not used in this AV receiver.
■ Controlling the tuner
To control the AV receiver’s tuner, press the [Tuner] (or
[Receiver]) Remote Mode button.
You can select AM or FM by pressing the [Tuner] button
repeatedly.
1 Arrow [ ]/[ ] buttons
Used to tune into radio stations.
2 Number buttons (54)
Used to select AM and FM radio stations directly.
3 D.TUN button (54)
Selects the Direct tuning mode.
4 Display button (54)
Displays information about the band, frequency,
preset number, and so on.
5 CH +/– button (55)
Selects radio presets.
Note:
• An Onkyo cassette recorder connected via can
also be controlled in Receiver mode (see page 108).
Controlling the AV Receiver
To control the AV receiver, press the [Receiver]
Remote Mode button to select Receiver mode.
You can also use the remote controller to control
your DVD player, CD player, and other components.
See page 100 for more details.
6
5
*
A
2
L
M
8
K
J
9
Receiver
4
3
Tuner
4
5
1
2
7 3