Integra DTR-5.9 - Manual (Page 9)

9
Getting to Know the AV Receiver —Continued
J Memory button (55)
Used when storing or deleting radio presets.
K Tuning Mode button (53)
Selects the Auto or Manual tuning mode for AM
and FM radio.
L Display button (50)
Displays various information about the currently
selected input source.
M Setup button
Opens and closes the onscreen setup menus, which
are displayed on the connected TV.
N Tuning, Preset, Arrow, and Enter buttons
When AM or FM is selected, the Tuning [ ] [ ]
buttons are used for radio tuning, and the Preset
[
] [ ] buttons are used to select radio presets
(see page 55). With the onscreen setup menus, they
work as arrow buttons and are used to select and set
items. The Enter button is also used with the
onscreen setup menus.
O Master Volume control (48)
Sets the volume of the AV receiver to Min, 1
through, or Max.
The maximum volume level can be limited with the
Maximum Volume setting. See “Volume Setup” on
page 88.
P Zone 2, Level [ ]/[ ], and Off buttons (96)
The Zone 2 button is used when setting Zone 2.
The Level Up and Down [ ]/[ ] buttons are used
when adjusting the volume level of Zone 2.
The Off button is used to turn off Zone 2.
Q Phones jack (50)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
R Input selector buttons (48)
Select the following input sources: DVD,
VCR/DVR, CBL/SAT, Game/TV, AUX, Tape,
Tuner, CD.
The [Multi CH] button selects the multichannel
DVD input.
S Tone, Plus [+], and Minus [–] buttons (79, 97)
Used to adjust the tone (bass and treble), and the
volume and balance of Zone 2.
T Setup Mic (39)
The automatic speaker setup microphone connects
here.
U Return button
Selects the previously displayed setup menu.
V AUX Input (33, 76)
Used to connect a camcorder, game console, and so
on. There are input jacks for composite video and
analog audio.
For detailed information, see the pages in parentheses.
1 SLEEP indicator (49)
Lights up when the Sleep function has been set.
2 MUTING indicator (49)
Flashes while the AV receiver is muted.
3 Listening mode and format indicators (51,
67)
Show the selected listening mode and audio input
signal format.
4 Tuning indicators (53)
FM STEREO (53): Lights up when tuned to a ste-
reo FM station.
RDS (65): Lights up when tuned to a radio station
that supports RDS (Radio Data System).
AUTO (53): Lights up when Auto Tuning mode is
selected for AM or FM radio. Goes off when Man-
ual Tuning mode is selected.
TUNED (53): Lights up when tuned to a radio sta-
tion.
5 Message area
Displays various information.
6 Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: MULTI CH, or HDMI.
7 Audyssey indicator
Flashes during automatic speaker setup.
Display
1 2 3 4
5 7 6