Listening to the radio —continued – Integra DTR-5.9 User Manual

Page 61

Advertising
background image

61

Listening to the Radio

—Continued

Notes:

• While a channel is locked, it cannot be selected for

listening.

• To unlock a channel, you must enter the correct PIN

number and change it to Unlocked in step 6.

Changing the PIN Number

5

Use the number buttons to enter
the 4-digit PIN number.

Or

Use the Left and Right [

]/[

]

buttons to select a number on the
screen, and then press [Enter].
Repeat this for each of the four
digits in the PIN number.

If you’re entering the PIN number for
the very first time, the PIN is stored,
and the following screen appears.

If you’ve already set a PIN number, you
must enter the correct PIN to get to this
screen. If you enter the wrong PIN, the
message “Wrong Code!” appears and
you’ll have to enter the PIN again.

Use the Up and Down [

]/[

]

buttons to select “Parental Lock,”
and then press [Enter].

The Parental Lock screen appears.

6

Use the Up and Down [

]/[

]

buttons to select a channel, and
use the Left and Right [

]/[

]

buttons to select Locked or
Unlocked.

The number, name, and status of the
currently selected channel is displayed.

7

When you’ve finished, press
[Enter] to save your changes, or
press [Return] to return to the
previous screen without saving.

When [Enter] is pressed, the confirma-
tion message “Locked” or “Unlocked”
appears.

or

SIRIUS Parental Lock

Edit Code
Parental Lock

SIRIUS Parental Lock

Edit Code
Parental Lock

SIRIUS Parental Lock

Parental Lock

Channel Status

xxxch wwwwwwww Unlocked

:CHANNEL
:STATUS

:SAVE
:RETURN

ENT

RET

8

Press the [Setup] button.

Setup closes.

1

Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.

The main menu appears onscreen.

2

Use the Up and Down [

]/[

]

buttons to select “7. Hardware
Setup,” and then press [Enter].

The Hardware Setup menu appears.

3

Use the Up and Down [

]/[

]

buttons to select “3. Tuner,” and
then press [Enter].

Note:

The Tuner screen appears.

Note:

If the SAT RadioMode is set to None
(see page 57), the “Antenna Aiming”
and “SIRIUS Parental Lock” items are
not available.

7. Hardware Setup

1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI

7-3.Tuner

SAT Radio Mode

SIRIUS

Antenna Aiming
SIRIUS Parental Lock

Advertising