Innotek UltraSmart IUT-300E - Manual (Page 3)

Step 2
Turning the collar ON and OFF
Step 1
Power Up
Quick Start Guide
IUT-300E
INNOTEK ® UltraSmart ™ Micro Remote Trainer, 275m
Remote: Insert 12v alkaline battery in the handheld remote. Replace the access
panel.
Collar: Charge the collar on the power outlet-mounted charging station. The light
on the collar will glow red while charging, and green when fully charged.
a. Press the
C
button (for collar) on the remote once or
twice until
D
appears in the display.
b. Hold the collar one inch from the remote, taking care not to touch the
metal contacts that touch your dog’s skin.
c. Press the
t
button. The collar will emit a
start-up tone, and the light will glow solid green.
d. To turn collar OFF, hold collar and remote one inch apart and press the
t
button. The collar will emit a shut-
down tone, and the light will glow solid red, then go out.
NOTE: To use two collars, repeat the procedure with the second collar.
This ON/OFF command only works when remote and collar are in close proximity; it will not work at a
distance. Never turn the unit ON/OFF while your dog is wearing the collar.
2
IUT-300E Manual 1/19/05 7:15 PM Page 4