Training tips – Innotek UltraSmart IUT-300E User Manual

Page 8

Advertising
background image

Compliance with US FCC and European Telecommunications
Regulations
This INNOTEK

®

Remote Training System is designed to meet

worldwide requirements for telecommunications compliance. This
system contains both receiver and transmitter devices. In the US,
each transmitter device complies with Part 95 and/or Part 15 of
the FCC rules; each receiver device complies with Part 15 of the
FCC rules.

Each device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Each device may display indications as to
where this system is compliant worldwide. Note that in some
countries, the use of this INNOTEK

®

Remote Training System may

be limited due to national frequency planning requirements, and
the user is always responsible for respecting national and local
rules before operating.

Training Tips

• Watch the included DVD to get the basics for training your

dog properly with a remote trainer.

• We recommend your dog be at least six months old before

starting a remote training program.

• Always praise your dog for good behavior!
• Teach him what the commands mean before introducing the

collar as a reinforcement tool.

• Keep training sessions brief, about ten minutes of training

and then a rest or play period of at least equal length.

• Dogs learn through repetition. You may have better training

success if you can elicit an undesired behavior when you can
anticipate it. For example, if the dog misbehaves and jumps
on visitors, have someone come in and out of the front door
several times over a half-hour period. You’ll be expecting it
and will be ready to teach your dog the right behavior.

• Always end a training session on a positive note. Let the dog

have success. This way he’ll look forward to the next session.

• Training should be fun for both you and your dog. Never train

when you are angry. If you get frustrated during training, stop
and come back to it later. Your dog will learn better when you
are both relaxed.

Status Light

After Removing From Charger
Continuous
Green/Amber/Red

Continuous Red

No Tone

20 sec

Battery strength
(see above)

Self-test failure; unit is
not operational

Pulsating Green

Pulsating Red

Continuous
Green

Blinking Green

Blinking Amber

Blinking Red

Duration of Tone
button press

Duration of the
Stimulation

No tone

No tone

No tone

No tone

Tone only – no
stimulation

Stimulation being
delivered

Over-stimulation
warning; collar locked
for 10 sec.

Collar battery 60%
strength or better

Collar battery 60-20%
strength

Collar battery less than
20% strength; charge
immediately

Alarm Tone

Condition

After Turning Collar ON

While on Charger

Solid Red

Solid Green

No Light

No Tone

No Tone

Charge in progress

Charge complete

Charge failure

Unit is in ReadyFit
mode for 90 sec after
turning on

ReadyFit mode
indicates collar is
making true contact
with dog's skin

Click; 5 consecutive
clicks for confirmed
fit

Blinking Amber

Blinking Green

Collar Status Indicators

7

IUT-300E Manual 1/19/05 7:15 PM Page 9

Advertising