Specifications – JVC RX-7022VSL User Manual
Page 44
41
Specifications
Designs & specifications are subject to change without notice.
Amplifier
Output Power
At Stereo operation:
Front channels:
100 W per channel, min. RMS, Both channels driven into 8
Ω at
1 kHz, with no more than 0.9% total harmonic distortion.
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8
Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
Center channel:
100 W, min. RMS, driven into 8
Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels:
100 W per channel, min. RMS, driven into 8
Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM):
2.7 mV/47 k
Ω
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
220 mV/47 k
Ω
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
0.5 V (p-p)/75
Ω
Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/CDR, VCR:
220 mV
Digital output:
Optical: DIGITAL OUTPUT
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
Signal-to-Noise Ratio (’66 IHF/DIN):
PHONO (MM):
70 dB/ 66 dB (at REC OUT)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
87 dB/67 dB
Frequency Response (8
Ω):
PHONO (MM):
20 Hz to 20 kHz (±1 dB)
CD, TAPE/CDR, VCR, TV SOUND/DBS, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:
±1 dB(20 Hz to 20 kHz)
Bass boost:
+3 dB ±1 dB at 100 Hz
Tone Control:
Bass (100 Hz):
±10 dB
Treble (10 kHz):
±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
DVD, VCR, DBS:
1 V(p-p)/75
Ω
S-video:
DVD, VCR, DBS:
(Y: luminance):
1 V(p-p)/75
Ω
(C: chrominance, burst):
0.286 V(p-p)/75
Ω
Component video:
DVD, DBS:
(Y: luminance):
1 V(p-p)/75
Ω
(P
B/
C
B
, P
R/
C
R
):
0.7 V(p-p)/75
Ω
Video Output Level/Impedance:
Composite video:
VCR, MONITOR OUT:
1 V(p-p)/75
Ω
S-video:
VCR, MONITOR OUT:
(Y: luminance):
1 V(p-p)/75
Ω
(C: chrominance, burst):
0.286 V(p-p)/75
Ω
Component video:
MONITOR OUT:
(Y: luminance):
1 V(p-p)/75
Ω
(P
B/
C
B
, P
R/
C
R
):
1 V(p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
EN30-42.RX-7020V[A]3
02.4.17, 5:17 PM
41