JVC CA-HXGD8 - Manual (Page 20)

18
Selecting the Sound Modes
You can select one of the preset Sound Modes.
* Surround elements are added to the SEA elements to create
being-there feeling in your room.
Creating Your Own Sound
Modes—User Mode
You can create your own Sound Modes to make sounds suit
your taste. The changed settings can be stored as the USER 1,
USER 2 and USER 3 modes.
1 Select one of the preset Sound Modes.
• If you want to add surround elements into your
Sound Mode,
select one of the Surround modes.
2 Enter into the SEA Control Mode.
• You can enter the SEA Control Mode only while the
Sound Mode appears on the display.
3 Adjust the SEA pattern.
1
Select one of the tone—BASS or
TRE.
2 Adjust the level of the
selected tone.
• You can adjust the bass
and treble level from –3
to +3.
3 Repeat steps 1 and 2 to adjust the level of the other
tone.
4 Finish the SEA pattern setting.
4 Select one of the User modes in which you want to
store yougt.
5 Finish the setting.
Remote control:
Main unit:
Surround modes*
DANCE Increases resonance and bass.
HALL Adds depth and brilliance to the sound.
STADIUM Adds clarity and spreads the sound, as in
an outdoor stadium.
SEA (Sound Effect Amplifier) modes
ROCK Boosts low and high frequency. Good
for acoustic music.
POP Good for vocal music.
CLASSIC Good for classical music.
User modes
USER 1/2/3 Your individual mode stored in
memory. See the next column “Creating
Your Own Sound Modes—User Mode.”
OFF No Sound Mode effect (FLAT).
INFO
SO
UND MODE
Main Unit
ONLY INFO
SO
UND MODE
SET
/DISPLAY
PRESET
SET
/DISPLAY
PRESET
SET
/DISPLAY
HX-GD8.book Page 18 Friday, March 19, 2004 11:27 AM