Selecting the video signal – JVC CA-HXGD8 User Manual

Page 9

Advertising
background image

7

To connect digital audio

To connect other equipment

By using an stereo mini plug cord (not supplied), you can
connect equipment with analog audio output jacks such as an
MD player, a TV, etc.

If the audio output on the other equipment is not stereo
mini plug type,

use a plug adapter to convert the stereo mini

plug to the corresponding plug of the audio output.

Selecting the Video Signal

When connecting a TV, you can use either one of the video
output terminals—COMPONENT or AV OUT.
After connecting the TV, set the video signal type correctly
for your TV.
• Make sure the unit is not yet turned on. If it is already

turned on, turn off then on again so that the selector setting
becomes active.

IMPORTANT

Always set volume to MIN when connecting or
disconnecting the other equipment.

DO NOT plug in any equipment until all
connections are complete.

OPTICAL
DIGITAL
OUTPUT

Before connecting optical digital cord, remove the
protective cap from the OPTICAL DIGITAL OUTPUT
terminal.

AUX

(front panel)

Portable audio
device,
Game, etc.

Stereo mini plug cord (not supplied)

Y/C

Select for sending S-Video signals through the
AV OUT terminal or for sending component
video signals through the COMPONENT jacks.

RGB

Select for sending the composite video signals
or RGB signals through the AV OUT terminal.

VIDEO OUT
SELECT

Y/C

RGB

HX-GD8.book Page 7 Friday, March 19, 2004 11:27 AM

Advertising