JVC CA-HXGD8 - Manual (Page 23)

21
Setting the Clock
Without setting the build-in clock, you cannot use Daily/
Recording Timers (see page 38) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
1 Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Adjust the hour.
3 Adjust the minute.
Now the built-in clock starts working.
To check the current time during play
Turning Off the Power
Automatically
With Sleep Timer, you can fall asleep listening to music.
• You can set Sleep Timer only while the System is turned
on.
1 Specify the time (in minutes).
2 Wait until the set time goes off.
To check the time remaining until the shut-off time
INFO
Main Unit
ONLY
CLOCK
/TIMER
PRESET SET
/DISPLAY
PRESET SET
/DISPLAY
SET
/DISPLAY
Clock
Source information
2 sec.
• If you press the button repeatedly, you can
change the shut-off time.
Remote
ONLY
INFO
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
SLEEP 90 SLEEP 120 Canceled
HX-GD8.book Page 21 Friday, March 19, 2004 11:27 AM