JVC 240-020-505 - Manual (Page 39)

64
Parameter Possible settings Description
KEYBOARD [ENGLISH]
STYLE FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
KboARd [ENG]
FRN
ITL
GER
ESP
JPN
PLAY BACK DVD
&232C TYPE [VTR]
232C dVd
[VTR]
TOTAL RECORDING TIME —
— —
∆
SYS2
MENU
MENU
Setup Menu
SYSTEM MENU Screen (continued)
For selecting whether to set DVD playback actions to the VTR or DVD mode. Actions
via RS-232C control will vary accordingly with this setting. Please see the following
table for details.
This button displays the total time for recording and erasing operations. (xHour xxMin)
This button is used to display the SYSTEM MENU (2/2) screen.
This button is used to return to the Setup Menu screen.
ⅥPlayback
Index Search
STOP Operation in Stop Mode
(Unfinalized Discs)
Accepts index of points that exist
in the disc.
Resume data will not be cleared.
Accepts index of points that exist
in the current title.
Resume data will be cleared.
Searches and stops at the
beginning of the last title.
Action When Set to VTR When Set to DVD
Note
This parameter is set when using a USB keyboard, and its purpose is to indicate the
keyboard’s layout (or language) as one of the following.
ENGLISH
FRENCH
ITALIAN
GERMAN
SPANISH
JAPANESE
The system must be restarted after this parameter is changed.
65
Parameter Possible settings Description
AC IN MODE [POWER ON]
POWER OFF
AC [oN]
oFF
TV TYPE [NTSC]
PAL
TV [NTSC]
PAL
VBID OUT [OFF]
(WIDE) ON
Vbid [oFF]
oN
Y/C TERMINAL [S1]
MODE S2
Y C TM [S1]
S2
OPERATION [OFF]
LOCK ON
oPLoCK [oFF]
oN
BACK
bACK
SYSTEM MENU (2/2) screen
For selecting whether to start up in the Operate ON or OFF mode when the MAIN
POWER switch at the rear of this unit is turned ON.
POWER ON : Start up in Operate ON mode
POWER OFF : Start up in Operate OFF mode
For selecting the signal system during recording and playback.
NTSC : When recording/playing back in the NTSC mode
PAL
: When recording/playing back in the PAL mode
This unit will automatically be rebooted when this setting is changed.
Upon reboot, all menu items except the date/time data and hour meter will be
restored to their default values.
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking
ID) signals to the analog video signals output from this unit. (NTSC only)
OFF : Do not add VBID signals (The Copyguard signals are piled up even if the
VBID is set to OFF.)
ON : Add VBID signals
This parameter is used to set the specification for the DVD recorder’s VIDEO Y/C
INPUT and OUTPUT terminal in order to enable the recording of wide-screen
discrimination signals.
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio and squeezed video is to be recorded.
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
Squeezed video : 16:9 wide-screen content with the left and right sides
compressed for normal aspect screens.
Letterbox video : Content with the top and bottom of the screen blackened out.
For selecting whether to enable operation lock.
OFF : Operation lock turns OFF and all operation buttons on the main unit are enabled
ON
: Operation lock turns ON and operation buttons on the main unit are disabled
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be
disabled.
Returns to the SYSTEM MENU (1/2) Screen