JVC 240-020-505 - Manual (Page 40)

66
Setup Menu
DVD MENU Screen
The following table identifies and describes the parameters that may be set using the DVD MENU screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
Parameter Possible settings Description
EDIT MENU ENABLE
[DISABLE]
EdIT oN
[oFF]
STYLE [TYPE1]
TYPE2
TYPE3
TYPE4
TYPE5
TYPE6
TYPE7
TYPE8
BACK
STYLE [T1]
T2
T3
T4
T5
T6
T7
T8
bACK
TITLE PATTERN [1] to 6
BACK
TITL P [1] to 6
bACK
CHAPTER [1] to 6
PATTERN BACK
CHAP P [1] to 6
bACK
THUMBNAIL [NORMAL]
FORM V-CUT
H-CUT
V+H CUT
THUMb [NoR]
VCUT
HCUT
V+H
This parameter is used to indicate whether or not a screen for editing the title and
chapter menus is to be displayed when title closing or finalizing is performed.
ENABLE : The menu editing screen is to be displayed.
Upon title closing, the THUMBNAIL EDIT screen will be displayed for
the corresponding chapter menu. (
☞ Page 44)
Upon finalizing, the TITLE MENU EDIT screen will be displayed for the
title menu. (
☞ Page 50)
DISABLE : The menu editing screen is not to be displayed.
This parameter is used to select one of the eight different display styles that have
been provided for title and chapter menus. (
☞ Page 35)
BACK : returns to the DVD MENU screen.
This parameter is used to open the TITLE PATTERN screen.
That screen can then be used to select a display pattern for the title menu.
BACK : Returns to the DVD MENU screen.
* 6 cannot be selected when setting for factory shipment.
This parameter is used to open the CHAPTER PATTERN screen.
That screen can then be used to select a display pattern for the chapter menus.
BACK : Returns to the DVD MENU screen.
* 6 cannot be selected when setting for factory shipment.
Thumbnail creation method for chapter and title menus during wide-signal recording
is selected.
NORMAL : The input signal is to be converted into thumbnails without modification.
If the input video has an aspect ratio of 4:3, the corresponding thumbnails
are also to have this aspect ratio.
V-CUT : In this case, the top and bottom of the video content is to be removed to
form thumbnails.
H-CUT : In this case, the left and right of the video content is to be removed to
form thumbnails. (SQUEEZE)
V+H CUT : In this case, the top, bottom, left, and right of the video content is to be
removed to form thumbnails. (LETTER BOX)
Default settings
TYPE TITLE PATTERN CHAPTER PATTERN
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 1 1
7 2 2
8 3 3
67
Parameter Possible settings Description
DVD MENU TOP+MENU
TYPE [TOP]
NONE
MENU T T+M
[ToP]
NoNE
DISC IN ACTION MENU
[TITLE]
dISC IN MENU
[TITL]
TITLE END MENU
REPEAT
STOP
[NEXT TITLE]
TI ENd MENU
REPT
SToP
[NEXT]
MENU
MENU
Select whether to create a TOP MENU or MENU in a completed disc (finalized disc).
This is set before inserting a disc or when a blank disc is inserted.
TOP+MENU : When finalizing a TOP MENU is created.
When closing a title a MENU is created.
TOP : When finalizing a TOP MENU is created.
When closing a title a MENU is not created.
NONE : Neither a TOP MENU nor a MENU is created. The disc will be without a menu.
Select the action when a completed disc (finalized disc) is inserted into this machine
or a DVD player.
This is set before inserting a disc or when a blank disc is inserted.
MENU : Displays the TOP MENU (title menu)
TITLE : Starts to playback TITLE1
Select the action to be taken when playback within a title of a completed disc (finalized
disc) is finished. This is set before inserting a disc or when a blank disc is inserted.
MENU
: Display the TOP MENU (title menu)
REPEAT : Repeat playback within a title.
STOP : Enter stop mode. The TOP MENU is not displayed.
NEXT TITLE : Start to playback the next title. In the case of playback of the final
title, start to playback the first title.
This button is used to return to the Setup Menu screen.
Note
Settings on this page will change accordingly with the disc information when a recorded disc is loaded.