Optical digital out signals, Maintenance, Dvd-r/-rw in dvd-vr format – JVC CA-NXG9 User Manual

Page 126: Svcd/vcd/cd, Cd with dts, Mp3/wma/wav/mpeg-1/mpeg-2/ asf, Divx, Cleaning the system, Handling discs

Advertising
background image

51

Optical Digital Out Signals

DIGITAL AUDIO OUTPUT

Output Signals

Playback disc/file

STREAM/PCM

DOLBY DIGITAL/

PCM

PCM ONLY

DVD Video

with 48 kHz, 16/20/24
bit Linear PCM

48 kHz, 16 bit Linear PCM*

with 96 kHz, Linear
PCM

48 kHz, 16 bit Linear PCM

with Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bit Linear

PCM

with DTS

DTS bitstream

48 kHz, 16 bit Linear PCM

DVD-R/-RW
in DVD-VR
format

with 48 kHz, 16/20/24
bit Linear PCM

48 kHz, 16 bit Linear PCM*

with Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bit Linear

PCM

SVCD/VCD/CD

44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM

CD with DTS

DTS bitstream

44.1 kHz, 16 bit Linear PCM

MP3/WMA/WAV/MPEG-1/MPEG-2/
ASF

32/44.1/48 kHz, 16 bit Linear PCM

DivX

with MP2, MP3

32/44.1/48 kHz, 16 bit Linear PCM

with Dolby Digital

Dolby Digital bitstream

32/44.1/48 kHz, 16 bit

Linear PCM

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the

OPTICAL DIGITAL OUTPUT terminal if the discs are not copy-protected.

Cleaning the System

• Stains should be wiped off with a soft cloth. If the

System is heavily stained, wipe it with a cloth soaked
in water-diluted neutral detergent and wrung well,
then wipe clean with a dry cloth.

• Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about
the following:

– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as

insecticides to it.

– DO NOT allow any rubber or plastic to remain in

contact for a long time.

Maintenance

To get the best performance of the System, keep your
discs and mechanism clean.

Handling Discs

• Remove the disc from its case by holding it at the

edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend

the disc.

• Put the disc back in its case after use to prevent

warping.

• Be careful not to scratch the surface of the disc when

placing it back in its case.

• Avoid exposure to direct sunlight, extreme

temperature, and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from
center to edge.

text_EN_NXG7G3.indb 51

text_EN_NXG7G3.indb 51

08.7.14 11:42:28 AM

08.7.14 11:42:28 AM

Advertising