JVC CA-NXG9 - Manual (Page 34)

31
Recording from the Radio/External
Equipment
• See page 65 for more information about the warning
messages shown on the display.
Preparation:
• Connect a recordable USB device to the USB 2
terminal. (See page 7.)
• To record from the external equipment, connect an
external equipment to the System. (See page 14.)
• Make recording settings. (See page 29.)
1
Select “FM,” “AM” or “AUDIO IN” as the
source.
2
For radio: Tune in to a desired station.
3
Enter recording mode.
4
Select a group to record the track into.
G 1 GROUP1?
• You can also give title to the new group before
recording. See the next column.
5
Start recording.
• For AUDIO IN: Start playback on the connected
equipment after pressing USB REC. Recording
starts automatically when sound signal is
detected on the System.
• You cannot change the source while recording.
• When MARKING is set to MANUAL MARK
(see page 29), press ENTER/SET when you want
to divide the recorded track.
6
Stop recording.
To give title to a new group before
recording
When you record tracks into “FORM GR?”, you can
give a group title before starting to record.
1
After selecting “FORM GR?”...
2
Edit the group title.
• For entering a title, see “How to enter titles” on
page 33.
3
Finish the procedure.
Recording starts.
(on the main unit)
text_EN_NXG9G5.indb 31 text_EN_NXG9G5.indb 31 08.8.5 10:52:31 AM 08.8.5 10:52:31 AM