JVC CA-NXG9 - Manual (Page 91)

16
4
Memorize the measurements.
Each time you hear a test tone, press the button.
You hear 5 test tones from the speakers.
5
Select a preset number from 1 to 3 to store
the equalization pattern.
After finishing the measurement, an appropriate
equalization pattern is created and it is shown in
white on the TV screen.
3
EXIT
1
2
PRESET
MY SOUND
SELECT PRESET 1 TO 3 AND PRESS
THE ENTER KEY TO STORE.
On the TV
• The last equalization pattern stored into the
selected preset number is shown in green.
• To return to the measurement, select “EXIT” on
the TV screen then press ENTER/SET.
6
Store the equalization pattern.
• To store other equalization patterns, press the
button again and repeat steps 3 to 6.
To exit MY SOUND setup
Creating a Soothing Tone for
Your Ear—MY SOUND
The sound tone you can hear is different in individuals.
MY SOUND creates an appropriate equalization
pattern for your listening condition.
To set up MY SOUND
1
Select “DVD/CD” or “USB” as the source.
2
Enter MY SOUND setup.
MY SOUND
SELECT START AND PRESS THE ENTER KEY
TO START MEASUREMENT.
START EXIT
On the TV
“MY SOUND” and “MEASURE” appear alternately
on the display.
3
Start the measurement.
A test tone comes out of the speakers.
MY SOUND
MEASURING... DATA 1 2 3 4 5
PRESS THE ENTER KEY IMMEDIATELY
AFTER YOU HEAR THE TEST TONE.
ENTER EXIT
Signal level
On the TV
text_EN_NXG7G3.indb 16 text_EN_NXG7G3.indb 16 08.7.14 11:41:48 AM 08.7.14 11:41:48 AM