JVC KD-ADV6160 - Manual (Page 55)

55
ENGLISH
To be continued....
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Causes Remedies
General
• Sound cannot be heard
from the speakers.
The volume level is set to
the minimum level. Adjust it to the optimum
level.
Connections are incorrect. Check the cords and
connections.
• The receiver does not
work at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc. Reset the receiver
(see page 2).
• Remote controller does not
work.
Dual Zone is activated
(see page 32). While Dual Zone is
activated, remote controller
only functions for operating
the DVD/CD player.
FM/AM
• SSM automatic presetting
does not work.
Signals are too weak. Store stations manually.
• Static noise while listening
to the radio.
The antenna is not connected
firmly. Connect the antenna firmly.
Disc playback
• Disc cannot be played
back.
Disc is inserted upside
down. Insert the disc correctly.
• CD-R/CD-RW or DVD-R/
DVD-RW cannot be played
back.
• Tracks on the CD-R/
CD-RW or DVD-R/
DVD-RW cannot be
skipped.
CD-R/CD-RW or DVD-R/
DVD-RW is not finalized. • Insert a finalized CD-R/
CD-RW or DVD-R/
DVD-RW.
• Finalize the CD-R/CD-RW
or DVD-R/DVD-RW with
the component which you
used for recording.
• Disc cannot be recognized. The DVD/CD player may
have functioned incorrectly. Eject the disc forcibly
(see page 2).
• “NO DISC” appears on the
display.
Disc is inserted incorrectly. Insert the disc correctly.
EN50-59_KD-ADV6160[J]f.indd 55 EN50-59_KD-ADV6160[J]f.indd 55 12/16/04 10:19:18 PM 12/16/04 10:19:18 PM