Jensen JMC-326 - Manual (Page 9)

8
2. Automatic tuning depends on the signal strength of the broadcasting station, so weaker stations
are sometime skipped. Tuning manually will help find the weaker stations. Stations with strong
signals may cause the tuner to stop before it reaches the actual broadcast frequency for the
station. Tuning manually will help ensure the best reception if this occurs.
3. FM MONO/STEREO selector for FM broadcasts. In stereo mode, the unit will automatically
switch to stereo mode if an FM stereo broadcast is received and will indicate “ST” in the display.
4. To receive a weaker (noisy) FM station, press the ST/MONO Button to switch the radio station
to MONO mode. The reception may be improved, but the sound is monaural (MONO).
TO PRESET CHANNELS
This unit is equipped with 20 each preset memories for AM and FM. Once they are preset, they can
be accessed by pressing the REP/PRST Button.
1. Press the Button to turn on the unit.
2. Press the STOP/BAND Button to choose between AM and FM bands.
3. Tune to a desired station.
4. Press the REP/PRST Button. The Preset Indicator “P - 01” appears and blinks.
5. While the channel indicator is blinking, press the
# or " Buttons to select the desired preset
channel.
6. Press the REP/PRST Button again to complete when the desired Preset Channel No. is shown.
7. Tune to other stations and repeat steps 4 to 6 to store the stations in the remaining preset
channels.
TO RECEIVE PRESET STATIONS
1. Press Button to turn on the unit.
2. Press the STOP/BAND Button to choose between AM and FM bands.
3. Press the REP/PRST Button repeatedly to select your desired preset channels.
4. Adjust the volume level using the
VOL
▲/▼ Buttons.
5. Press again to turn the System off. The LCD backlight goes off.
TIPS FOR BEST RECEPTION
AM – The AM bar antenna is built inside the cabinet. If AM reception is weak, change the position of
the cabinet until the internal antenna picks up the strongest signal.
FM – During FM reception, always keep the FM Wire Antenna untied and fully extended. If FM
reception is weak, try varying the position and direction of the FM Wire Antenna until you find
the strongest signal.