Quick setup, Connecting to the computer, Looking at the images from a computer – JVC 0807TNH-II-IM User Manual
Page 22
22
Quick Setup
This TV can be used as a computer screen. Use a commercially available D-SUB cable to
connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you
want to listen to the sound from the computer, use a commercially available RCA cable to
connect the INPUT-5 audio input terminal to the computer's audio output terminal.
Connecting to the computer
INPUT
5
INPUT
4
Y
VIDEO
R - AUDIO
-
L
VIDEO
R - AUDIO
-
L
PC IN
(D-SUB)
INPUT
3
Y
P
R
P
B
P
R
P
B
TV Rear Panel
Computer
Notes:
• When you do the above connection, set "V5 INPUT" in the INITIAL SETUP menu to "PC".
See page 49.
• Refer to your computer manual for a detailed explanation of the connections concerning your
computer.
• Use cable with ferrite cores and no longer than of 3 m to avoid electromagnetic disturbance.
• Make sure that the connectors are facing the correct way when connecting.
• After connecting, tighten the two screws to fix the connectors in place.
Looking at the images from a computer
After starting the computer, press the V5 button on the remote control. You can listen to the
sound when the sound from the computer is connected to the INPUT-5 AUDIO input terminal.