JVC 0807TNH-II-IM - Manual (Page 58)

58
Button Functions
Turns the TV on or off.
Press the P OWER button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
1 (One)
2 (Two)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the T UNE button
Number Buttons - 10Key Pad
Power
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the S UB C H
button, you can select a sub channel easily.
At first, select TV or STB mode to use the Sub channel function. See page 68.
For example, to move to sub channel 123-45:
Press 1, 2 and 3 in order
Press the S UB C H button
Press 4 and 5 in order
Press the TUNE button
Note:
• If there are more than 2 major channels, select the digital channel by using the π† buttons
and then press the O K button.
To watch sub channels
Use these buttons to move up or down all the available channels your TV is able to receive.
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
CH –.
Channel +/–