JVC 0807TNH-II-IM - Manual (Page 64)

64
Button Functions
By pressing the S OUND button, you can change the sound mode of the MaxxAudio function.
The sound mode has four settings (HIGH, MID, LOW and OFF).
Press the S OUND button
π† To MaxxAudio
è To choose HIGH, MID, LOW or OFF
Press the M ENU when finished
Sound
SOUND EFFECT
OPERATE EXIT MENU
MaxxAudio MID
Note:
• To set MaxxAudio (MaxxBass, MaxxTreble, MaxxStereo and MaxxVolume) individually for
each sound mode, see page 55.
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
At first, select TV mode to use the multi-language/MTS function.
Press the ML/M TS button
By every press of the M L /M TS button, you change
the mode
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the M L /M TS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in VIDEO-1, 2, 3, 4 or 5 mode, as
described on page 59.
• ML/MTS will not work when you are using the HDMI.
• You can also change the mode by pressing the π† buttons.
MTS
STEREO
SAP
MONO
ON AIR
ON AIR
MaxxAudio is a registered trademark of Waves Audio Ltd. in the
USA, Japan and other countries.