Getting started, English – JVC RX-884RBK User Manual

Page 14

Advertising
background image

9

English

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver. Refer also to the
manuals supplied with your components. If you want to connect a component not listed
in the table below, refer to the manual supplied with it.

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-
enhancing device such as a
graphic equalizer between the
source components and this
receiver, the sound output
through this receiver may be
distorted.

Notes:

• Any turntables incorporating

a small-output cartridge such
as an MC (moving-coil type)
must be connected to this
receiver through a
commercial head amplifier or
step-up transformer. Direct
connection may result in
insufficient volume.

• You can connect either a

cassette deck or an MD
recorder to the TAPE/MD
jacks. When connecting an
MD recorder to the TAPE/MD
jacks, change the source
name, which will be shown on
the display when selected as
the source, to “MD.” See page
18 for details.

Audio Components

Video Components

• Turntable

• DVD player*

• CD player*

• TV

• Cassette deck or MD recorder*

• DBS tuner*

• VCRs

• Video camera

* You can connect these components using the methods described in “Analog

connections” (below) or in “Digital connections” (see page 12).

If your audio components have a COMPU LINK-3 or TEXT COMPU
LINK terminal

See also page 55 for detailed information about the connection and the COMPU
LINK-3 remote control system.

See also page 56 for detailed information about the connection and the TEXT
COMPU LINK remote control system.

Cassette deck

or

MD recorder

To audio output

To audio output

To audio input

To audio input

To audio output

If an earth cable is provided for your
turntable, connect the cable to the
screw marked GND on the rear panel.

To audio output

Turntable

CD player

Getting Started

GND

RIGHT

LEFT

TAPE

/MD

IN

(PLAY)

OUT

(REC)

CD

PHONO

AUDIO

EN01-13.RX-884R[E]/1.PM5

98.3.26, 11:41 AM

9

Advertising