JVC RX-884RBK - Manual (Page 70)

65
English
IMPORTANT:
To operate JVC’s video components using this remote control:
• Aim the remote control directly at the remote sensor on the VCR, DVD player or
TV, not on the receiver.
VCR1 (the VCR connected to the VCR1 jacks)
You can always perform the following operations (with the
remote control mode selector set to “AUDIO/TV/VCR”):
VCR1
: Turns on or off the VCR1.
After pressing VCR1 or VCR1 CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
PLAY:
Starts playing.
REW: Rewinds a tape.
FF: Fast winds a tape.
STOP: Stops operations.
PAUSE: Pauses playing or recording temporarily. To
release it, press the PLAY button.
REC ¶ ¶ ¶ ¶ ¶: Press this button with the PLAY button to
start recording.
Press this button with the PAUSE button to
enter recording pause.
CHANNEL +/–: Changes the channels on the VCR.
1 – 9, 0:
Selects the channels on the VCR.
For channel 5, press 5.
For channel 10, press 1, then 0.
DVD player
After pressing DVD (with the remote control mode selector set
to “AUDIO/TV/VCR”), you can perform the following
operations on a DVD player:
PLAY:
Starts playing.
4 4 4 4 4:
Returns to the beginning of the current (or
previous) track.
¢ ¢ ¢ ¢ ¢: Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE: Stops playing temporarily. To release it, press the
PLAY button.
RM-SR884RU REMOTE CONTROL
SOUND CONTROL
CD
DISC
VCR1 ANALOG /DIGITAL AUDIO
DVD VCR1 VIDEO VCR2
CD
TV/DBS
TEST
REAR R
REAR L
SEA MODE SUBWOOFER
TAPE/MD FM/AM PHONO
5 4 6
2 1 3
8 7 /P 9
0 +10 10
AUDIO/TV
/VCR
VCR1 TAPE
CONTROL
VOLUME
CHANNEL
MUTE
FF / ¢
PLAY
STOP
REC
TV/VIDEO
TV VOLUME
PAUSE
4 / REW
TV/CATV
CNTR CNTR TONE
ENTER
MENU
EFFECT
CATV
/DBS
FM MODE/MUTE 100+ RETURN
SURROUND
MODE
O N
SC REEN CON TR
O L
SET EXIT
PTY –
PTY +
PTY SEARCH
DISPLAY MODE
/DBS
After pressing DVD (with the
remote control mode selector
set to the “AUDIO/TV/VCR”
position), these buttons can
be used for the DVD menu
operations.
Note:
For detailed menu operations,
refer to the instructions
supplied with the discs or the
DVD player.
MENU
TEST
REAR R
REAR L
5 4 6
2 1 3
8 7 /P 9
CNTR CNTR TONE
ENTER
EFFECT
Operating JVC’s Audio/Video Components
Notes:
• Some JVC VCRs can accept
two types of the control
signals — code “A” and “B.”
Before using this remote
control, make sure that the
remote control code of the
VCR1 is set to code “A.”
• You can use either the VCR1
button or the VCR1
CONTROL button to activate
the buttons listed to the left. If
you press VCR1, the playing
source also changes. On the
other hand, if you press VCR1
CONTROL, the playing source
does not change.
EN63_76.RX-884R[E]/1.PM5 98.3.26, 1:10 PM 65