Jura Capresso X7-S - Manual (Page 13)

13
Ⅲ Switch the machine off with the ON/OFF switch.
Ⅲ Press the key until an acoustic signal is heard.
Ⅲ
: EMPTY DRIP TRAY
Ⅲ : INSERT AGENT IN TANK / PRESS DECALCIFYING
Dissolve 3 tablets completely in 0.7 litres of water in a vessel and
pour the mixture into the empty water tank.
Place two sufficiently large vessels under the pivoting nozzle
(18) and the coffee spout.
Ⅲ Press the key .
Ⅲ
: UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard.
Ⅲ
: EMPTY DRIP TRAY
Ⅲ : FILL WATER TANK
Ⅲ Place a vessel under the pivoting nozzle (18) and the coffee spout
(4).
Ⅲ : PRESS DESCALING
Ⅲ
: UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard
Ⅲ
: EMPTY DRIP TRAY / CLEAN CONTACTS (Chapter 16.4).
21. Disposal
Please dispose of old machines in an environmentally
compatible way
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
22. Adjustments by the JURA service technician
The following adjustments/alterations can only be done by a
JURA service technician.
– Re-arrangement of the key occupancy of the coffee products
– Alteration of the cycles in “pot of coffee” draw-off
– Filter capacity
23. Tips for perfect coffee
Height-adjustable coffee spout
You can adjust the height of the coffee spout to the size of your cups.
Grinding
Please refer to Chapter 7 “Setting of grinder“
Pre-warm cups
You can warm the cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important the warming of
the cups.
Sugar and cream
Heat is lost by stirring the contents of the cup. Adding milk or cream
from the fridge considerably lowers the temperature of the coffee.
E