Jura Capresso X7-S - Manual (Page 7)

7
Important information for the user
Thank you for choosing this JURA product.
Please study these instructions carefully before using your new ma-
chine and keep them in a safe place for easy reference in the future.
Should you require further information or should particular problems
occur that are not dealt with in sufficient detail for you in these oper-
ating instructions, then please ask your local dealer for the informa-
tion you require or get in touch with us directly.
You will also find useful tips on operation and maintenance of
your IMPRESSA X7-S on the website at www.jura.com.
Don’t forget to check out the Knowledge Builder our animated
operating instructions. LEO, our assistant, will take you through
all the functions.
1. Description
The first IMPRESSA for the office and small gastronomy area is out -
standing not only because of its modern technology, but also a num-
ber of features, and prepares 1 or 2 cups of espresso/coffee in only one
brewing process. The Intelligent Pre Brew Aroma System (I.P.B.A.S.
©
)
ensures that the full coffee aroma is made use of and supplies the
best espresso/coffee, guaranteed to be covered by a splendid froth.
Optionally, coffee can be used from either of the grinders, and the
mixture can be programmed individually. Draw ing-off Cappuccino is
possible at the push of a button and without moving the cups. Inte-
grated rinsing, cleaning and de-scaling programmes ensure perfect
cleanliness at the push of a button.
2. Safety instructions
2.1 Warnings
Ⅲ Children are unaware of the dangers that can be caused by
electrical machines; for this reason, children should never be left
unsupervised with electrical machines.
Ⅲ The machine may only be used by people who have been
instructed.
Ⅲ Never use a faulty machine or one with a damaged power cable.
Ⅲ Never repair or open the machine yourself. Repairs may only be
done by authorised service centres using original spare parts and
accessories.
Ⅲ Never immerse the machine in water.
2.2 Safety precautions
Ⅲ Never expose the machine to the effects of weather (rain, snow,
frost) and never operate it with your hands wet.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to any wa-
ter that may leak. Never stand on hot or warm surfaces (oven
hobs). Keep out of the reach of children.
Ⅲ Remove the plug from the power socket if you are away for some
time (holidays etc.).
Ⅲ Always remove the plug from the power socket before cleaning.
Ⅲ When removing the plug from the power socket, never tug on the
cord or the machine itself.
Ⅲ The machine is connected to the mains power socket via an electric
cable. Please ensure that no-one trips over the cable and pulls the
machine down. Keep children and pets at a distance.
Ⅲ Never put the machine or parts of it into the dishwasher.
Ⅲ To prevent overheating, please put the machine in a place with a
good circulation of air.
Ⅲ If you use de-scaling agents containing acid, remove any splashes
and drips on sensitive surfaces, in particular natural stone and
wood surfaces, straight away or take corresponding safety precau-
tions.
3. Preparing the machine
3.1 Checking the mains voltage
The machine has been set to the correct mains voltage in the factory.
Ensure that your mains voltage corresponds to the details on the
rating plate attached to the reverse of your machine (Fig. 1/A).
3.2 Checking the fuse
Check whether the fuse matches your machine.
3.3 Filling the water tank
Ⅲ Remove the water tank and rinse it out well with cold tap water.
Ⅲ Then fill the water tank and put it back into the machine. Please
ensure that the tank locks in properly .
Please only use fresh, cold water. Never fill up with milk, min-
eral water and other fluids. You can also top up water without
removing the tank. Simply remove the cover and pour in the
water from above with a vessel and replace the lid again.
3.4 Adding coffee beans
To ensure that your machine gives satisfaction for a long time
and to avoid repairs, please note that the grinder on your JURA
coffee machine is not suitable for coffee beans that have been
treated with additives (e.g. sugar) during or after roasting. Use
of such coffee blends can result in damage to the grinder. Any
repair costs incurred as a result are not covered by the war ranty
provisions.
You have the possibility of adding two different sorts of coffee beans.
Ⅲ Remove the cover from the bean container.
Ⅲ Clean out any dirt or foreign objects from the bean container.
Ⅲ Fill coffee beans into the bean container and replace the cover
again.
4. Switching the machine on
Ⅲ Operate the switch on the reverse of the machine (Fig. 1/II).
Ⅲ Switch the machine on with the ON/OFF
operating switch.
Ⅲ : PLEASE WAIT
Ⅲ Place an empty cup under the coffee spout (4).
Ⅲ
: RINSE UNIT
The rinsing is done first via the Cappuccino nozzle, after which
the coffee spout is cleaned.
E