Jack Lananne's Power Juicer power juicer - Manual (Page 12)

Pusher
STEP
5
:
Use the crescent tool to
remove the blade. Place the
two pegs at either end of the
crescent tool into the two
holes on the blade. Press
down and turn counter-
clockwise while holding filter
and receptacle to unlock
the blade. Remove blade
carefully.
Disassembly
STEP
6
:
Remove filter.
STEP
7
:
Make sure spout is in the upright
position to avoid leakage. Remove
receptacle from base.
STEP
8
:
Wipe down with damp sponge.
Never submerge base into water
or any other liquids.
Main Unit
POWER JUICER ELITE
12
Disassembly/Main Unit
Note: Refer to page
6 for all part names.