Jack Lananne's Power Juicer power juicer - Manual (Page 9)

POWER JUICER ELITE
Assembly/Main Unit
9
Main Unit
STEP
9:
Insert pusher into chute. Always use
pusher to feed fruits and vegetables
into unit. Push gently, never force.
The blade will do the work.
W WA AR RN NIIN NG G: : WHEN JUICING
CHERRIES MAKE SURE THE POWER
IS OFF AND BLADE HAS STOPPED
SPINNING BEFORE REMOVING
THE PUSHER FROM
THE CHUTE
STEP
8:
Lock lid into place by lifting locking
bar up until it clicks into grooves
located on both sides of the lid.
Make sure locking bar is in the full
upright, locked position.
IMPORTANT: The unit will not start until this bar
is properly locked in place.
STEP
7:
Make sure juice spout is
in the downward position.
If the juice spout is left
in the upright position
the juice will not flow.
It will stay in the
receptacle and may
overflow from the sides.
DOWNWARD POSITION
UPRIGHT POSITION
Note: Refer to page
6 for all part names.
Assembly