Getting started, Connections, Connecting a tv – JVC TH-A85 User Manual

Page 11

Advertising
background image

8

Getting started

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the components you are going

to connect.

Connecting a TV

To view pictures and on-screen displays, connect the TV to the center unit.
• Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (

A pg. 53)

7

To connect a TV with the SCART connector

Connect the center unit’s AV (SCART) connector with your TV’s SCART connector using a SCART cable (not supplied).
• Set the RGB-Y/C selector correctly according to your TV.

If the TV accomodates the RGB video signal, set the RGB-Y/C selector to “RGB” so that you can enjoy better-quality pictures.

If the TV accomodates the S-video signal, set the RGB-Y/C selector to “Y/C”.

If the TV accomodates the composite video signal only, set the RGB-Y/C selector to “RGB”.

* Some TV’s SCART connectors output audio signal. In such a case, you can enjoy the TV sound through this system.

NOTE
• No sound comes out from “AV” (SCART) connector.

7

To connect a TV through the composite or S-video jacks

Connect the TV using the composite video cord (not supplied) or an S-video cord (not supplied).
If your TV has an S-video (Y/C-separation) jack, you can get better picture quality than by using composite video connection.
• Connect the S-video cord by matching the / mark on the plug to the one on the rear of the center unit.

* When connecting an S-video cord, set the RGB-Y/C selector to “Y/C”.

When connecting a composite video cord, set the RGB-Y/C selector to “RGB”.

NOTE
• When the RGB-Y/C selector is set to “RGB”, correct video signal is not output from the S-VIDEO jack on the rear panel.
• Whether the RGB-Y/C selector is set to “RGB” or “Y/C”, the composite video signal is always output from the OUT VIDEO jack.

Connections

Center unit

RGB-Y/C selector

TV

SCART cable
(not supplied)

To AV (SCART) connector

To SCART

connector

*

Composite video cord

(not supplied)

To S-video input

S-video cord

(not supplied)

TV

To composite video input

Center unit

or

RGB-Y/C selector

*

TH-A85-55[B]-04Start.fm Page 8 Tuesday, April 1, 2003 12:39 PM

Advertising
This manual is related to the following products: