For tv operations – JVC TH-A85 User Manual
Page 20
Getting started
17
For TV operations
You can operate your TV using the remote control supplied with
this system.
• Refer also to the instruction manuals supplied with your TV.
7
To set the manufacturer’s code
You can operate a JVC TV without setting the remote control
signal.
1
Slide the remote control mode selector
to TV.
2
Press and hold F TV.
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV: Press 0, then 7.
For a Toshiba TV: Press 2, then 9.
5
Release F TV.
6
Try operating your TV by pressing
F TV.
When your TV turns on or off, you have entered the correct
code.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
NOTE
• Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
7
Operation
IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
The following buttons are available:
F TV:
Turns TV on and off.
TV VOL +/–:
Adjusts the volume.
TV/VIDEO:
Selects the input mode (either TV or
VIDEO).
CHANNEL +/–:
Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN:
Alternates between the previously selected
channel and the current channel.
Remote control
mode selector
Number buttons
(play button)
Manufac-
turer
Code
Manufactur-
er
Code
JVC
01
Nordmende
13, 14, 18, 26 – 28
Akai
02, 05
Okano
09
Blaupunkt
03
Orion
15
Daewoo
10, 31, 32
Panasonic
16, 17
Fenner
04, 31, 32
Philips
10
Fisher
05
Saba
13, 14, 18, 26 – 28
Grundig
06
Samsung
10, 19, 32
Hitachi
07, 08
Sanyo
05
Inno-Hit
09
Schneider
02, 05
Irradio
02, 05
Sharp
20
Magnavox
10
Sony
21 – 25
Mitsubishi
11, 33
Telefunken
13, 14, 18, 26 – 28
Miver
03
Thomson
13, 14, 18,
26 – 28, 30
Nokia
12, 34
Toshiba
29
TH-A85-55[B]-04Start.fm Page 17 Thursday, April 10, 2003 2:59 PM