Specification – Jensen JTA-475 User Manual
Page 17
17
Symptom
Possible Problem
Solution
AC cord is not plugged
into a wall outlet
Plug the AC cord into a wall outlet.
The unit does not
respond (no power).
Wall outlet is not
functioning.
Plug another device into the same
outlet to confirm the outlet is working.
AM band is too noisy.
The reception at the set
location is poor.
Slightly rotate the unit for the best
reception.
Volume level is set too
high.
Decrease the volume.
Sound is distorted.
Sound source is
distorted.
Try a different audio source such as a
music CD.
CD mode is not
selected.
Slide the FUNCTION switch to select
CD mode.
CD Player does not play.
CD is not installed or
installed incorrectly.
Press the CD onto spindle, printed
side facing up.
CD skips while playing.
Disc is dirty or
scratched.
Wipe with cloth or another disc.
Unit gets warm after
extended play at high
volume.
This is normal.
Turn the unit off a period of time or
lower volume.
Power Requirement
Main
unit:
AC120V~
60Hz
Remote control
2 x 1.5V “AAA” (UM-4) size batteries (included)
Frequency Range
Radio Band
FM 88 ~ 108 MHz
AM 530 ~ 1710 KHz
Power Consumption
Main Unit:
18Watts
90 DAY LIMITED WARRANTY AND SERVICE
SPECIFICATION