JVC XV-FA92SL - Manual (Page 11)

Preliminary knowledge
9
Pre
lim
in
ar
y
know
le
dg
e
English 9 4/PREVIOUS button (29, 35, 54)
Skips back a chapter, title, group or track. Also used for
the page selection of a menu screen (for DVD VIDEO/
DVD AUDIO/Video CD).
Holding down this button during playback reverses
playback rapidly (except MP3 disc).
0 7/CLEAR button (29, 40, 54)
Stops playback. Also used to clear all the programmed
selection for the program play.
- 1/SLOW– button (29, 38)
Pressing this button during playback reverses playback
rapidly (except MP3 disc).
Pressing this button while a DVD VIDEO disc is paused
reverses playback slowly.
= TOP MENU button (33)
Displays the top menu of a DVD AUDIO disc or the title
menu of a DVD VIDEO disc on the TV screen.
~ CURSOR ( 5 Up, ∞ Down) - CH (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR 5/∞” buttons in
this manual.
When the TV - DVD switch is set to TV, they are used
to select a TV channel.
! CHOICE button (57)
Brings up the preference on-screen display on the TV
screen.
@ Infrared signal-emitting window (23)
Point this window toward the remote sensor on the
front panel when pressing buttons.
# TV STANDBY/ON button (24)
Turns the TV on or off (standby).
$ TV - DVD switch (14, 24, 32)
When setting this switch to “TV”, the numeric, cursor
and TV/VIDEO - CANCEL buttons are used to control
your TV.
When setting it to “DVD”, these buttons are used to
control the unit.
% DVD STANDBY/ON button (26)
Turns the unit on or off (standby).
^ RETURN button (33-34)
Returns to the previous menu (for Video CD).
& TV/VIDEO - CANCEL button (24, 32)
Switches the TV input mode when the TV - DVD switch
is set to TV.
Cancels the last selection of the program when the
TV - DVD switch is set to DVD.
* VFP button (48)
Pressing this button brings up the VFP (Video Fine
Processor) window in which you can select or adjust
the picture character.
( AUDIO - S.FREQ button (47, 53)
Selects the audio (for DVD AUDIO/DVD VIDEO/Video CD).
By pressing this button for more than one second during
playback, the current sampling frequency is shown in the
display window for a while.
) ZOOM +/– buttons (39)
Zooms in or out the picture (for DVD VIDEO/Video CD).
_ ¢/NEXT button (30, 35, 54)
Skips forward a chapter, title, group or track. Also used for
the page selection of a menu screen (for DVD VIDEO/DVD
AUDIO/Video CD).
Holding down this button during playback advances
playback rapidly (except MP3 disc).
+ 8/STROBE button (29, 38, 54)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
Pressing this button while paused advances the still
picture frame-by-frame.
¡ 3/SELECT button (28, 33)
Starts playback. Also used as a SELECT button for PBC
of Video CDs.
¡/SLOW+ button (29, 38)
Pressing this button during playback advances
playback rapidly (except MP3 disc).
Pressing this button while a DVD VIDEO or Video CD
disc is paused advances playback slowly.
£ MENU button (33)
Displays a DVD menu on the TV screen.
¢ ENTER button (11)
Executes the selected item in a menu or on-screen
display.
CURSOR ( 2 Left, 3 Right) - VOL (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR
2/3” buttons
in this manual.
When the TV - DVD switch is set to TV, they are used to
change the TV audio volume.
§ ON SCREEN button (11)
Brings up an appropriate on-screen display for
controlling advanced functions for the current disc on
the TV screen.
3HQJIP 3DJH 7XHVGD\ $XJXVW     30