JVC XV-FA92SL - Manual (Page 63)

Initial settings
61
In
it
ial s
e
tti
ng
s
English
DTS BASS MANAGEMENT
This item controls the
output signals when playing
back DTS-encoded DVD
VIDEO discs.
• OFF
This is the normal setting for DTS-encoded discs.
Signals with the full frequency range are output from
all speakers when playing back a DTS-encoded disc.
This mode ignores all “Small” settings in the speaker
setting screen (All “Small” settings are regarded as
“Large”).
• ON
All speaker settings (front, center and rear) in the
speaker setting screen are effective when playing back
DTS-encoded discs. The low frequency signal fed
from the sub-woofer output is boosted up regardless
of the “Bass redirect setting” in the speaker setting
screen.
See page 62 for the speaker setting screen.
AUTO STANDBY
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters
standby mode automatically.
• 60
Time is set to 60 minutes.
• 30
Time is set to 30 minutes.
• OFF
The auto standby function is off.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The “screen saver” picture
appears and its brightness
changes.
• OFF
The screen saver function is off.
AV COMPULINK MODE
This item is provided for use
in the future. Leave it as the
default setting (“DVD1”).
PREFERENCE2 PREFERENCE1 SPK. SETTING
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX OFF
COMPRESSION
DTS BASS MANAGEMENT
OFF
OFF
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE1
AV COMPULINK MODE DVD1
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX OFF
COMPRESSION OFF
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE1
AV COMPULINK MODE DVD1
SPK. SETTING
DTS BASS MANAGEMENT OFF
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if a static picture is displayed for a
long time. Be careful not to allow the monitor screen to
be burned out when you set the SCREEN SAVER mode
to “OFF”.
• The TV screen may be garbled when you set the
SCREEN SAVER mode to “MODE 1”. In this case, set to
another mode.
• When a static picture is displayed for a long time during
playback, the screen saver function is always activated
in “MODE 1” regardless of whether you select “MODE
1” or “MODE 2”.
PREFERENCE2 PREFERENCE1 SPK. SETTING
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX OFF
COMPRESSION
DTS BASS MANAGEMENT
OFF
OFF
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE1
AV COMPULINK MODE DVD1
PREFERENCE2 PREFERENCE1 SPK. SETTING
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX OFF
COMPRESSION
DTS BASS MANAGEMENT
OFF
OFF
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE1
AV COMPULINK MODE DVD1
)$ (1*ERRN 3DJH  )ULGD\ $XJXVW     $0