JVC XV-FA92SL - Manual (Page 28)

26
Ba
sic
op
er
ati
o
ns
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press DVD STANDBY/ON on the remote control unit or press STANDBY/ON on the front panel.
The STANDBY/ON indicator, which illuminates in red during the standby mode, lights in green, while each DISC indicator
(1 through 7) shows the current status of whether a disc is set or not in the corresponding tray.
• The first time you turn on the unit after connecting the power cord, the DISC indicators are illuminated until the unit detects that no
disc is set in the corresponding tray. Once detecting the status, the unit memorizes it unless you unplug the power cord, so the
DISC indicators show the status of corresponding trays correctly.
• You can directly turn on the unit by pressing the 3, DISC (1 through 7) or 0 (OPEN/CLOSE) button while the unit is on standby,
without pressing the DVD STANDBY/ON on the remote control unit or STANDBY/ON on the front panel. The behavior of the
unit after pressing these buttons while the unit is on standby is the same as pressing them while the power is on. See the following
description in which the unit is assumed that the power is on when starting operations.
Inserting and removing discs
Up to 7 discs can be set on the disc tray carousel.
1
Press
0 (OPEN/CLOSE) on the front panel.
The carousel opens and you can access to two of seven trays.
• From the second time on, the carousel opens with the previously played disc on the left-front tray.
DVD STANDBY/ON
TV DVD
TV DVD
STANDBY/ON
REPEAT
1 2 3
5 6
8 9
0 +10 10
7
4
3D
PHONIC
TV/VIDEO
CANCEL
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV -/-- TV0 MUTING
RETURN
DISC
SELECT
STANDBY/ON
STANDBY/ON
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
8 7
OPEN/CLOSE 0
SKIP ¢ 4
DVD AUDIO/DVD VIDEO/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7 -DISC
EXCHANGE
DISC SKIP
DVD AUDIO
NOTE
• Even if you press the DVD STANDBY/ON or STANDBY/ON button to turn off the unit, the unit is not disconnected from
the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit
consumes a very small amount of power.
STANDBY/ON
STANDBY/ON
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
8 7
OPEN/CLOSE 0
SKIP ¢ 4
DVD AUDIO/DVD VIDEO/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7 -DISC
EXCHANGE
DISC SKIP
EXCHANGE/ DISC SKIP button
0 (OPEN/CLOSE) button
DVD AUDIO
4
5
)$ (1*ERRN 3DJH  )ULGD\ $XJXVW     $0