JVC CA-UXH35 - Manual (Page 20)

17
Basic Disc Operations
While playing a disc, you can do the following
operations.
To stop playing for a moment
During play, press
3/8 CD.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press
3/8 CD again.
To go to another track
Before or during play, press
¢ or
4 repeatedly.
•
¢ : Skips to the beginning of the
next or succeeding tracks.
• 4 : Goes back to the beginning of
the current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s)
before or during play allows you
to start playing the track number
you want.
Ex.: For track number 5, press 5.
For track number 15, press
+10, then 5.
For track number 20, press
+10, then 10.
For track number 32, press
+10, +10, +10, then 2.
To locate a particular point in a track
During play, press and hold
¢ or
4.
•
¢ : Fast-forwards the tracks.
•
4 : Fast-reverses the tracks.
Programming the Playing Order of the
Tracks—Program Play
You can arrange the order in which tracks play before
you start playing. You can program up to 20 tracks.
On the remote control ONLY:
1
Load a disc.
• If the current playing source is not the CD
player, press
3/8 CD, then 7 before going to
the next step.
2
Press PRGM (program).
The PROGRAM indicator lights up
on the display.
• If a program has been stored in memory, the
program is called up.
3
Press UP or DOWN
to select the track number,
then press SET.
• You can select the track number
directly using the number
button(s). (See “To go to another
track directly using the number
buttons.”)
4
Repeat step 3 to program
other tracks you want.
5
Press
3/8 CD.
The tracks are played in the order you have
programed.
If you try to program a 21st track
“FULL” will appear on the display.
To stop playing, press
7.
To exit from Program Play, press
PRGM (program) before or after playing.
• The PROGRAM indicator goes off.
CD
1
4
7
10
2
5
8
3
6
9
10
PRGM
PROGRAM
Track number Program step number
CD
PRGM
UP
DOWN
SET
EN16-19_UX-H30[B]f.pm6 02.12.26, 1:37 PM 17