JBL CS3 User Manual
Page 10
F Subwoofer Trigger Output: Connect this trigger output to the
trigger input of the JBL subwoofer, so that the subwoofer will
switch on and off at the same time as the rest of the system.
G USB On-the-Go Input: This input may be used to temporarily
connect a USB thumb device or portable hard disk for direct play-
back of audio, image of video files, a digital photo camera or a USB
hub.
H HDMI Output: Connect this output to the HDMI input of a high-
definition LCD, plasma or video projector for the best possible
picture quality.
I Remote IR Output: This connection permits the IR sensor in the
receiver to serve other remote controlled devices. Connect this
jack to the “IR IN” jack on JBL or other compatible equipment.
J Remote IR Input: If the CS3/CS5’s front-panel IR sensor is
blocked due to cabinet doors or other obstructions, an external IR
sensor may be used. Connect the output of the sensor to this jack.
K TV Audio Input: If your screen is connected to the CS by an
HDMI, component, S-video or composite cable, connect the
analog output of your TV to this input. If you have your TV
connected to the CS with a SCART cable, an audio connection
to the TV input is not necessary.
10
REAR-PANEL CONNECTIONS