JBL CS3 - Manual (Page 7)

0 Main Information Display: This display delivers messages and
status indications to help you operate the CS3/CS5 receiver.
1 Power On/Off (Standby): Press the button once to turn the
CS3/CS5 receiver on, press it again to put the unit in the Standby
mode. Note that when the CS3/CS5 receiver is switched on, the
power indicator around the button turns blue.
2 Open/Close: Press this button to open or close the disc tray.
3 USB On-the-Go Input: This input may be used to temporarily
connect a USB thumb device or portable hard disk for direct play-
back of audio, image of video files or a USB hub. The USB inputs
are designed to power a single USB device at a time. If additional
hard disks are connected through a hub, it is necessary that addi-
tional external power supplies are used to power the hub and hard
disks.
4 Headphone Jack: This jack may be used to listen to the
system’s output through a pair of headphones. Be certain that the
headphones have a standard 3.5mm stereo phone plug. Note that
the main room speakers will automatically be turned off when the
headphone jack is in use.
7
English
FRONT-PANEL CONTROLS
0 Main Information Display
1 Power On/Off (Standby)
2 Open/Close 3 USB On-the-Go Input
4 Headphone Jack