Jwin JX-DVD400 - Manual (Page 30)

Connect the Y, Pb/Cb, Pr/Cr outputs from the player to the
corresponding YUV inputs of TV with video cables(not provied)
and then make the audio connections with audio cables the
player and TV as indicated in the diagram on the right.
2.Connect with YUV (Y Pb/Cb Pr/Cr)
Terminal
To get a better picture on the Progressive Scan TV, adjust the
TV settings to
. Press
the button on the remote control after the DVD player has
read the disc so that the player switches into the
Progressive Scan Video Input Mode
PS
Progressive
Scan Video Output Mode.
*When connecting to a normal TV, don t put the DVD player in
progressive scan mode, there will be no picture display and
may cause damage to your TV.
13