Jwin JX-DVD400 - Manual (Page 36)

7.2.2 Recall
Pressing the button will return all settings back to the factory
default setting.
7.2.3 OSD
Press the button to display the information of the disc during
playback..
7.2.4 MUTE
During playback, the
button is used to activate the MUTE
mute function. It turns off the playback sound immediately.
To resume normal sound level, press the
button MUTE
again.
7.2.5 Numeric Keys (0-9, +10)
During playback you can locate a title by entering the title
number or locate a specific chapter or track directly in combination
with the
button. SEARCH
19
7.2.6 Clear
When you input numbers from
, you can
press button to clear the numbers entered.
NUMERIC KEYS
CLEAR
7.2 Function Buttons on the Remote
Control
7.2.1 PS
The PS button allows you to change between PROGRESSIVE
or
(ordinary TV) modes. INTERLACE
(Always put the player in the mode when using an INTERLACE
ordinary TV set not capable of accepting the Progressive Scan
video signal. Otherwise ,there will be no display on TV and may
cause damage to your TV.)