JVC CX-7000 Series - Manual (Page 87)

Printer Driver Settings
m
"[Setup] Tab" (A page 87)
m
"[Print] Tab" (A page 87)
v
"[Printing area] Dialog Box" (A page 89)
v
"[Color] Dialog Box" (A page 90)
v
"[Look up table] Dialog Box" (A page 90)
v
"[Dither] Dialog Box" (A page 91)
v
"[UV ink] Dialog Box" (A page 91)
v
"[Printer settings] Dialog Box" (A page 94)
m
"[Encode] Tab" (A page 94)
m
"[Configuration] Tab" (A page 95)
m
"[Version] Tab" (A page 95)
Setting Example
"Example of Printer Setting" (A page 96)
"Example of Encode Setting" (A page 102)
[Setup] Tab
.
m
Orientation
Settings for printing orientation.
v
Portrait
Print with the shorter edge of the card on top.
v
Landscape
Print with the longer edge of the card on top.
m
Number of copies
Number of copies to print. Enter a number up to 999.
m
Settings for turns over the card
Settings for the card turn over operation.
v
Turns over the card after loading
Selecting this checkbox turns over the card after it is loaded.
m
[Load...] button
Loads setting information from a specified file.
m
[Save...] button
Saves setting information to a specified file.
[Print] Tab
.
m
Print
Executes printing.
Checked : Executes printing.
Unchecked : Printing is not executed, but encoding can be
performed.
m
Print on both sides
Prints both sides of the card.
Unchecked : Prints one side of the card.
Checked
: Prints both sides of the card.
m
Print the back side first
Prints the image on the back side first when printing on both sides of
the card.
Unchecked : Starts printing from the image on the front side.
Checked
: Starts printing from the image on the back side.
Memo:
The checkbox is enabled during double-sided printing.
m
Front side/Back side
Front side : Print settings for the front side of the card.
Back side : Print settings for the back side of the card.
m
Print mode
Ink list. Specify the ink to use for printing.
v
1. YMC:
Prints using the YMC ink.
v
2. K:
Prints using the Resin K ink.
v
3. YMCK:
Prints using the YMC ink and Resin K ink.
v
4. YMC+UV:
Prints using the YMC ink. Prints data set in the [UV ink] dialog
using the UV ink.
v
5. K+UV:
Prints using the Resin K ink. Prints data set in the [UV ink]
dialog using the UV ink.
v
6. YMCK+UV:
Prints using the YMC ink and Resin K ink. Prints data set in the
[UV ink] dialog using the UV ink.
Cautions:
v
Print error occurs if an ink that is not mounted to the printer is
selected.
Setup
87