John Lewis JLDWW 1206 - Manual (Page 21)

Interrupt a washing
programme in progress
• Open the dishwasher door; the
programme will stop. Close the door; the
programme will start from the point at
which it was interrupted.
• Press the On/Off button; all lights will turn
off. Press the On/Off button again; the
programme will start from the point at
which it was interrupted
End of the washing
programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme. (No audible signal
if the sound volume option has been
deactivated).
• The message PROGRAMME END
appears on the display.
The dishwasher’s drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing programme has
ended this device operates
intermittently for another 20
minutes, as long as the
dishwasher is switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
1. Switch off the dishwasher.
2. Open the dishwasher door and leave it
ajar. Wait a few minutes before removing
the dishes; this way they will be cooler and
the drying will be improved.
When the washing programme
has finished, it is recommended
that the dishwasher is unplugged
and the water tap turned off.
21