John Lewis JLDWW 1206 - Manual (Page 8)

Menu options
Setting an option is possible ONLY with the
appliance in setting mode.
The message CHOOSE PROGRAMME
on the display indicates that the appliance is in
setting mode.
It will NOT be possible to enter the menu
options when:
• A washing programme and a delay start
have already been set or are in progress.
Cancel the programme and delay start to
return to setting mode.
• The washing programme has just ended.
Switch off the appliance and then switch it
on again; the appliance is in setting mode.
The appliance will return to the
programme menu if an option is not
selected within a few seconds.
To enter the menu options:
• Simultaneously press and hold the
programme scrolling buttons until option
language appears flashing in the display.
• With the button on your left you can skip
to another option;
• with the button on your right you enter the
sub menu.
• To confirm the selection made wait a few
seconds and the appliance will return to
programme setting.
Menu options Submenu
Language Allows you to select the language for the display
of the messages
Sound volume 5 levels available
level 0 = volume deactivated (ALL audible signals
are deactivated)
Brightness 10 levels available
Contrast 10 levels available
Water hardness Allows you to set the water softener according to
the hardness of the water in your area.
10 levels available
Rinse aid
Allows you to reactivate the rinse aid dispenser.
0 = rinse aid dispenser deactivated
1 = rinse aid dispenser activated.
Available only with the Multi tab function active.
8