JVC LPT0762-001B - Manual (Page 32)

Filename [XVS20AG_07S-VHS.fm]
Masterpage:Left+
32
EN
Page 32 April 9, 2003 10:50 am
OPERATIONS ON S-VHS DECK (cont.)
G-
CODE
™/
S
HOW
V
IEW
™ Timer
Programming
With the G- CODE /S HOW V IEW system, timer programming is
greatly simplified because each TV programme has a
corresponding code number which your unit is able to
recognize.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
B
Access the G- CODE /S HOW V IEW screen.
C
Enter the G- CODE number.
INFORMATION
G- CODE and S HOW V IEW are different trademarks used to
represent the same easy recording feature, but only the term
G-
CODE system will be used in the instructions. If you use the
S HOW V IEW system, follow the same instructions listed for the
G- CODE system.
Before performing the G- CODE ™/S HOW V IEW ™ Timer
Programming:
● Be sure to read “G-
CODE ™/S HOW V IEW ™ System Setup”
(
੬
pg. 31).
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/S-VHS/DVD switch to the right.
Press PROG.
Press the number keys to
enter the G-
CODE number of
a programme you wish to
record.
● If you make a mistake, press &
and input the correct number.
G-CODE/SHOWVIEW NO.
[0 – 9]
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
[0 – 9]
[ ] : DELETE
[PROG] : EXIT
G-CODE/SHOWVIEW NO.
1 2 3 4 5 6 7 8
XVS20AG_01.book Page 32 Wednesday, April 9, 2003 10:53 AM