JVC LPT0762-001B - Manual (Page 27)

Masterpage:Right-No-Heading
EN
27
Filename [XVS20AG_07S-VHS.fm]
Page 27 April 9, 2003 5:28 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press SP/LP/EP ( p). The current setting appears on the
front display panel or TV screen. Press SP/LP/EP ( p)
again to change the setting while the tape speed is
displayed on the TV screen.
● Select the appropriate colour system with “PAL/MESECAM”
and “NTSC”. (
੬
pg. 77, 78)
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the S-VHS deck to remove the
cassette.
NOTES:
● S-VHS recording is possible only for PAL signals recorded in
the SP or LP mode, or NTSC signals recorded in the SP mode.
S-VHS recording is impossible for NTSC4.43 signals.
● S-VHS ET recording is possible only for PAL signals recorded
in the SP mode, or NTSC signals recorded in the SP mode.
● When recording in NTSC, if EP is selected, recording will
always be done in the VHS mode even if an S-VHS cassette is
used.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
੬
pg. 30)
XVS20AG_07S-VHS.fm Page 27 Wednesday, April 9, 2003 5:28 PM