JVC LPT0762-001B - Manual (Page 55)

Masterpage:Right-No-Heading
EN
55
Filename [XVS20AG_08DVD.fm]
Page 55 April 9, 2003 5:58 pm
Angle Selection
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
If the disc contains “multi-angle” parts, “
” appears on the TV
screen at the beginning of the “multi-angle” part when “ON
SCREEN GUIDE” is set to “ON”.
● During playback
When using the ANGLE button:
A
Access the menu.
Press ANGLE.
● The following pop-up window appears on the TV screen.
Example: The first view angle is selected out of 3 view angles
recorded.
B
Select the view angle.
Press ANGLE repeatedly to select the desired view angle.
● Each time you press the button, the angle of the scene
changes.
Example:
1/3 ]2/3]3/3](Back to the beginning)
The pop-up window disappears if no operation is done for about
5 seconds.
When using the on-screen bar
A
Access the on-screen bar.
Press DISPLAY twice. The on-screen bar appears on the
TV screen.
B
Select menu item.
Press w e to move 0 to , then press OK.
● The following pop-up window appears under the selected
item.
Example: The first view angle is selected out of 3 view angles
recorded.
C
Select the view angle.
Press rt repeatedly to select the desired view angle,
then press OK.
● Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press DISPLAY.
NOTES:
● When “X” appears on the TV screen in step C, the current
scene is not recorded from multiple angles.
● During the operation above, audio is not played back.
1
1
1/3 1/3
1
1/3
2
1/3
3
1/3
XVS20AG_08DVD.fm Page 55 Wednesday, April 9, 2003 5:58 PM