JVC LPT0762-001B - Manual (Page 85)

Masterpage:Right-No-Heading
EN
85
Filename [XVS20AG_10Subsidiary.fm]
Page 85 April 9, 2003 10:50 am
Manual Channel Set
Store channels that were not stored during Auto Set Up
(
੬
pg. 16) or Auto Channel Set (
੬
pg. 83).
A
Access the Main Menu screen.
Press SET UP MENU.
B
Access the Tuner Set screen.
Press rt to move the highlight bar (pointer) to “TUNER
SET”, then press OK or e.
C
Access the channel list.
Press rt to move the highlight bar (pointer) to ”CH
EDIT”, then press OK or e.
D
Select the channel position.
Press rt to move the highlight bar (pointer) to an open
channel position, then press OK or e.
E
Select the band.
Press rt to move the highlight bar (pointer) to the
desired band, then press OK to initiate Manual Channel
Set.
F
Set the station.
The screen to the right appears
when a station is detected.
If you do not want to store the
detected station...
Press rt to move the highlight
bar (pointer) to “CONTINUE”,
then press OK or e. Channel
search will resume.
If you want to store the detected station...
Press rt to move the highlight bar (pointer) to “STORE”,
then press OK or e. The Channel List appears again.
● The blueback screen and the TV picture currently being
broadcast appear alternately for 8 seconds each.
● If you want to store another channel, repeat steps 4 4 4 4 – 6 6 6 6.
● When channel search completes for that band, the Band Select
screen appears again. To set channels for other bands, select
another band and start Manual Channel Set again (
੬
steps 5 5 5 5
and 6 6 6 6).
G
Return to the normal screen.
Press SET UP MENU.
● To change positions, see “Swap Channel Position” ( ੬
pg. 86).
[ / ]
[MENU] : EXIT
BAND SELECT
VHF L
VHF H
UHF
[MENU] : EXIT
MANUAL CH SET
PLEASE WAIT
VHF L 300MHZ
[ / ]
[MENU] : EXIT
STORE
CONTINUE
XVS20AG_01.book Page 85 Wednesday, April 9, 2003 10:53 AM