JVC GR-D201 - Manual (Page 16)

16
EN
Master Page: Left
The provided memory card is already inserted in the
camcorder at the time of purchase.
1
Make sure the camcorder’s power is off.
2
Open the card cover (MEMORY CARD).
3
To load a memory card, firmly insert it with its
clipped edge first.
To unload a memory card, push it once. After the
memory card comes out of the camcorder, pull it
out.
● Do not touch the terminal on the reverse side
of the label.
4
Close the card cover.
To protect valuable files (available only for SD
Memory Card)…
Slide the write/erase protection tab on the side of the
memory card in the direction of “LOCK”. This
prevents the memory card from being recorded
over. To record on this memory card, slide the tab
back to the position opposite to “LOCK” before
loading it.
NOTES:
● Be sure to use only SD Memory Cards marked
“ ” or MultiMediaCards marked
“ ”.
● Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card, consult its manufacturer or dealer.
● Before using a new memory card, it is necessary to
FORMAT the card. ( ੬ pg. 30)
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognise whether
or not the card is installed.
Loading A Memory Card
/Unloading A Memory Card
Memory
card
Clipped edge
Card Cover (MEMORY CARD)
Label
Write/erase protection tab
GR-D200PAL.book Page 16 Monday, June 30, 2003 6:10 PM